Shop headings: New Spares | Used Spares | Accessories | Brands
Rocker cover screw kit containing 16 replacement stainless steel socket cap bolts for round and square barrel engine rocker covers. Only one kit required per engine
To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models without billet rocker cover protectors fitted, for models with rocker cover protectors see SSA80015. This kit will suit a V11 with standard rocker cover protectors which are much thinner than aftermarket types.
See SSA81522 for rocker cover trim retaining screws on 2v/cyl CARC models, these are not included with this kit.
More than 5 in stock
£9.00
INC VAT
£7.50 EX VAT
Sump bolt kit containing all replacement stainless steel socket cap bolts for models with a sump extension fitted. Some models e.g. Cali 1100 and series 1 Cali EV models have a sump extension fitted as standard
To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). For Cali EV models check whether you have a sump extension fitted, the later one piece deep sump uses SSA80008
More than 5 in stock
£16.00
INC VAT
£13.33 EX VAT
1 litre of Agip SAE 10W fork oil. Eni Fork Oil 10W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.
As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 5W also available, use a combination of 5W and 10W to tune your damping more precisely
Eni Fork Oil 10W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.
This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.
The corrosion-resistant properties of Eni Fork Oil 10W allow effective protection of surfaces against corrosive phenomena.
Eni Fork Oil 10W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name
More than 5 in stock
GU30530527
£14.00
INC VAT
£11.67 EX VAT
Full service kit containing 1 x UFI oil filter, 1 x UFI air filter, 2 x NGK BPR6ES spark plugs, 2 x rocker cover gaskets and all crush washers and O rings to complete a service on your bike
Save £'s by buying everything in a service kit
See TOA41006 for oil filter tool.
See FUA30106 or FUA01090 for fuel filter. Oils and lubricants available separately. The oils you need are 1 x OIA01152 and 2 x OIA08194 or save time and money by ordering service oil kit OIA18006 with your service kit.
More than 5 in stock
£42.00
INC VAT
£35.00 EX VAT
Full engine and gearbox seal kit, includes all necessary seals for a complete engine and gearbox overhaul.
Full gasket sets also available. Can also be fitted to models equipped with a Saprisa charging system if front crank oil seal ENA94238 is ordered
This part is due back in stock soon, call 01484 841395 to reserve yours
17999550 GU17999550 17 99 95 50
1799 9550 1799.9550 17.99.95.50
£75.00
INC VAT
£62.50 EX VAT
Top end gasket and seal set containing rocker cover, base, head and exhaust gaskets plus top end O rings
Top end gasket set for one cylinder. Inlet manifold gasket ENA27155 available separately
1 in stock
£27.00
INC VAT
£22.50 EX VAT
1 litre of Agip SAE 15W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 15W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.
As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 10W and 15W to tune your damping more precisely
Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades. ENI oils were previously sold under the AGIP name
More than 5 in stock
£14.00
INC VAT
£11.67 EX VAT
Full gearbox seal kit and gasket set for overhauling 5 speed gearboxes on big twins
Bearings available separately and as kit GEA92000
This part is due back in stock soon, call 01484 841395 to reserve yours
£42.00
INC VAT
£35.00 EX VAT
Starter motor deposit, buy this deposit if you are buying one of our reconditioned starter motors and we haven't already received your servicable exchange unit. This deposit will be refunded once we receive your complete reconditionable Valeo or Bosch starter and solenoid
More than 5 in stock
£80.00
INC VAT
£66.67 EX VAT
M6 flat stainless steel washer
More than 5 in stock
£0.30
INC VAT
£0.25 EX VAT